| Set Home | | Contact Us |
 
Today:
 
 
RY03-DC Motor Torque(Taper)Controller
RY04-AC Toruqe Motor Controller(Board)
RY05-Corona Treatment System
RY06-Corona Processing Frame
RY07-Plasma / Corona Sheet Treater
RY08-Manual,Automatic Tension Controller(Board)
RY09-Correction Controller Series
RY10-DC Motor Speed Regulating Control Board
RY11-Counter,Length Measurer,Counter Wheel
RY12-DC Motor (Intelligent) Controller
RY13-Inverter
RY14-Photoelectric & UltrasonicSensor
RY15-Electrostatic Eliminator,Discharger
RY16-Magnetic Powder Clutch,Brake
RY17-DC,Torque Motor
RY18-Soft Packing Machinery Accessories
 
 
 
 
 
 Product Name:DCZLB-600/3000W(18A)Series DC Motor Coiling Tension (Speed Regulating)Control Board
 Info:

Item No.:RY10-16

I. Introduction
  
     There is a wide range of speed regulating of DC motor, and it is beyond comparison with others motors especially in low speed running ,With a smooth speed regulating, a strong overload capacity ,a fairly large of thermo moving and braking  torque ,DC motor is widely used in places where require high performance for speed regulating.
     This control board has the silicon controlling trigger mode , making it more accurate and reliable, According to the international standard and absorbing advanced technology and experience ,this completely avoids the disadvantage of the former types like low speed rate and small torque at low speed coving the true characteristics of DC motor .Meanwhile this board has been greatly improve in technology, which can make a motor obtain a closed loop result even under the condition of the speed open-loop, showing a low speed property of DC motor obviously. And it has such function as voltage negative –feedback, current negative feedback overflowing soft protection and a soft stating and so on ,its running performance is steady and reliable ,and the temperature compensation function is steady
     It comes to the essential solution for the tension control of coiling device, which can be divided into two methods of tension control: machinery type and electrical type ,among which the machinery type depends on the sliding function of a friction slider or other sliding or other sliding or other sliding devices to control the tension ,this method is less sensitive and the preset value of the tension varies 2-3 times ,An electric control type depends on the regulation of the current (torque )、voltage (rotation rate)to perform  a tension control ,which is more accurate and simpler in its structure ,but its control system to perform constant tension reeling ion and out according to diameter varies of coil disc, through control system automatic adjust the armature voltage of motor and current increasing to make the rotation rate of the disc and torque change automatically, maintaining the same coiling linear speed with an obvious result.
     This board is widely used in plastic machinery ,food machinery ,cable machinery ,machinery processing , paper making ,printing ,test equipment ,chemical laboratory equipment and stirring equipment and so on .the coiling tension and speed can be controlled via open loop or closed loop combined with displacement controller.
 
2. Controller Board Specification
 
Adapted rare-earth permanent--magnet ferromagnetic permanent -magnet, and motors of division excitation, series excitation and repeat excitation
Rated power
0.2
0.4
0.6
0.8
1.1
1.5
2.2
3.0
4.0
5.5
7.5
Rated torque
1.3
2.6
3.9
5.2
7.2
9.8
14.3
19.5
26.0
35.8
49.0
Rated current
1.2
2.4
3.6
5
7
9
13
18
24
33
45
Rated voltage
220V single (Note: The required power of controlling board varies according to the motor rated voltage )
Rated rotation
1500r/min
Rated frequency
50/60HZ
DCZLB series board Exterior Dimension( L*W*H) mm
192ⅹ136ⅹ70
(0.2~1.1KW)
192ⅹ136ⅹ85
(1.5~2.2KW)
192ⅹ168ⅹ110
(3~5.5KW)
230ⅹ300ⅹ135
(7.5KW)
Output voltage
H1、C2
DC 0-195V
F1、F2
DC200V
Variation rate of speed
Variation  of mains voltages 
(±15%)
<0.2
Variation of temperature
-10ºC -40ºC
 
<0.05%
Variation of main frequency
(±3HZ)
<0.1%
Buffer stop device
0-10s adjustable
Buffer start device
0-10s  adjustable
Protection device for current -limiting
Auto reduction of speed (current -limiting adjustable)
Feature
Tension feature: low rotation rate, big torque; high rotation rate ,small torque
High rotation rate ,big torque ;low rotation rate, mall torque of moment motor.
Load increased and rotation rate descended ,torque increased ,and the output power doesn't change
Speed regulating feature: scope of speed regulating :1:20;variation of load rotation is under 0.2%       
 
 
 
 
 
   

About Us  | Download | Feedback | Contact | E-mail | Manage

 
Add:No.17,Unit 30,Hongbei Garden Ⅱ,ZhouSong North Road,Ruian,Zhejiang ,China 325200
Tel:(86 577)65809661 65619661 013587470606
Fax:(86)577)65809661 65619661-899