Product Name:DS-30 Series DC Motor Intelligent Speed Regulating Control Board |
Info:
Item No.:RY10-06
DS 30 Series DC Motor Intelligent Speed Regulating Board is made by our factory ,its featured in high quality ,multifunction ,
low noise and low rotation rate and big torque adopting DC servo controlling ,which achieving a dual closed loop and dual se
parating control of current and speed of the motor.Accuracy motor current reading and prefect function of fault protection ,so
that make the motor work stability under the rated parameters.The professional EMC EMI design raised the speed controller
on the adaptation to the industrial environment and reduced the breakdown rate,which can bring much convenience to users
and improve the price -performance of the controller
2.Intelligent Speed Regulating Specification
Applies to rare earth permanent
magnet ferromagnetic permanent
magnet,and motors of division
excitation,series excitation and
repeat excitation |
Rated power(KW) |
0.2 |
0.4 |
0.6 |
0.8 |
1.1 |
1.5 |
2.2 |
3.0 |
|
Rated torque(N·M) |
1.3 |
2.6 |
3.9 |
5.2 |
7.2 |
9.8 |
14.3 |
19.5 |
|
Rated current(A) |
1.2 |
2.4 |
3.6 |
5 |
7 |
9 |
13 |
18 |
|
Rated voltage
(V) |
220V single -phase (Note: the required power of this board varies
according to the motors rated voltage difference |
|
Rated rotation(r/min) |
1500r/min |
|
Rated frequency(HZ) |
50/60HZ |
Exterior Dimension( W*H*D) mm |
105*128*50 |
Output voltage |
Armature H1,C2) |
DC0-200V |
|
Filed Excitation F1 ,F2 |
DC200V |
Acceleration |
0~10, adjustable |
Rage of
speed regulation |
0~100 grades |
Rage of current |
0~100 grades |
function |
1.short circuit ,overflow protection power-down data protection
2.Double&a, mp;a, mp;n, bsp;speed selection control &, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, lt;, /SPAN>
&, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, lt;, /o:p> |
3.Basic Circuit
The wiring terminal of this controller are divided into two parts:main circuit and control circuit .While wiring ,
using must wire correctly according to the following diagram
4.Function direction of main circuit control circuit terminal of this controller
Name of terminal |
Function Notes |
A、N |
Input terminal of single -phase AC-220V |
H1、H2 |
Armature of DC motor |
F1 F2 |
Field excitation of DC motor |
TA TB |
While it's running ,relay pull in output |
INO |
Input of external switch |
IN1 |
An external meter pulse signal input |
DC0 |
Compensation input of external speed analog value |
12V |
DC 12V power source output |
GND |
Power source 0V |
, lt;, /SPAN>
&, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, lt;, /o:p> |
3.Basic Circuit
The wiring terminal of this controller are divided into two parts:main circuit and control circuit .While wiring ,
using must wire correctly according to the following diagram
4.Function direction of main circuit control circuit terminal of this controller
Name of terminal |
Function Notes |
A、N |
Input terminal of single -phase AC-220V |
H1、H2 |
Armature of DC motor |
F1 F2 |
Field excitation of DC motor |
TA TB |
While it's running ,relay pull in output |
INO |
Input of external switch |
IN1 |
An external meter pulse signal input |
DC0 |
Compensation input of external speed analog value |
12V |
DC 12V power source output |
GND |
Power source 0V |
, lt;, /SPAN>
&, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, lt;, /o:p> |
3.Basic Circuit
The wiring terminal of this controller are divided into two parts:main circuit and control circuit .While wiring ,
using must wire correctly according to the following diagram
4.Function direction of main circuit control circuit terminal of this controller
Name of terminal |
Function Notes |
A、N |
Input terminal of single -phase AC-220V |
H1、H2 |
Armature of DC motor |
F1 F2 |
Field excitation of DC motor |
TA TB |
While it's running ,relay pull in output |
INO |
Input of external switch |
IN1 |
An external meter pulse signal input |
DC0 |
Compensation input of external speed analog value |
12V |
DC 12V power source output |
GND |
Power source 0V |
, lt;, /SPAN>
&, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, amp;, lt;, /o:p> |