Main products:plastic film ,plastic sheet and board,metallic foil surface corona processors ,single sheet corona processor (vulgo
electric spark processor ,electric compactor).Applied in industries of plastic film blowing,printing,lamination,glue coating,coating cloth,
digits jetting,paint spraying,suitable for materials of all kinds of plastic film,sheet and board material ,aluminum foil,aluminum film plating
(such as PP,PE,PET,OPP,PS,ABS etc.) paper and fiber.
XC _JF series corona processor provides you an entirely new solution of preprinting process for plastic film .The special pulse
density modulation control equivalent circuit resonant inverse design can make the AC output terminal produce square wave voltage
or zero level voltage within certain power regulation period ,thus even a corona discharge has a strong non liner load p,it can also
control power output within a wide range ,performing functions of locking phase,switch softening and power regulation,completing with
perfect multi route protection circuit ,making the whole corona processor liable and steady ,the product uses a microcomputer for power
regulating and digits display ,it's easy in operation and understanding and meeting the requirements for strong or weak treatment.
GBF series enclosed corona frame must be used with XC JF Series split corona treater ,the high voltage transformer placed into the
GBF corona frame which avoid the long lead appearing high voltage ionization phenomenon ,so make sure safety and energy conservation.
With the functions of no material/broken film stop working so that avoid the spark impact the same parts damaging rubber roll.
The corona equipment is high voltage power supply,for security ,all series of all equipment must be installed
ground wire.
2.Specification of corona processor
Model |
Power |
Working voltage |
Working frequence |
Max treatment width |
Treatment tension |
XC-JF1200(10A) |
2kW |
220V±10% |
15-30HZ |
800mm |
≥38dyne |
XC-JF1200(16A) |
2kW |
220V±10% |
15-30HZ |
1000mm |
≥40dyne |
XC-JF3000(25A) |
3kW |
220V±10% |
15-30HZ |
1300mm |
≥40dyne |
3.Specification of discharge frame
Model |
Treatment width |
Exterior dimension (mm) |
GBF-6556B |
30mm-600mm |
1135(30)*300(100)*225(90) |
GBF-8556B |
30mm-800mm |
1335(30)*300(100)*225(90) |
GBF-10556B |
30-1000 |
1535(30)*300(100)*225(90) |